In these two extended video tutorials post-production specialist Paul Maunder takes us through how he resolves 7 typical audio problems like Rumble, Hum, Crackle, Broadband Noise, Clipping, Excessive reverb and finally audio with multiple different issues, using a variety of different plug-ins from the stock plug-ins that come with Pro Tools as well as plug-ins from iZotope, McDSP and Sonnox…

Part 1 - Rumble, Hum, Crackle And Broadband Noise

In part 1 Paul looks at the first four problems - Rumble, Hum, Crackle and Broadband Noise. The timing below are there to enable you to jump to the section of the video you are interested in.

0:42 - Intro and Rumble using the Avid EQ1 1 Band stock plug-in

6:13 - Hum using the McDSP NF575 noise filter

11:15 - Crackle using the Sonnox Oxford DeClicker plug-in

15:00 - Broadband Noise using the iZotope RX 7 Voice De-noise plug-in

In this 2nd video Paul turns his attention to Clipping, Excessive Reverb, and an audio clip with a number of different issues. Again the timing are here so you can jump to the appropriate section of the video.

0:18 - Clipping using the iZotope RX De-clip plug-in

3:04 - Excessive reverb using the iZotope RX De-reverb

5:08 - Audio with multiple different issues using the standalone version of iZotope RX 7 using the RX Connect plug-in to take the audio from Pro Tools into RX and back into Pro Tools at the end.