The Modal CRAFTsynth v2 kickstarter campaign has a day left to run and it has easily exceeded its target of £50K. At the time of writing it has £78K pledged! Don’t miss out, there is still time to pledge and access special bundles and of course early access to this exciting new synth.

When Does this Kickstarter Expire?

If you want to participate, sign up before Wed, January 9 2019 4:00 PM UTC +00:00

How Much Do I Have To Pledge To Support The Modal CRAFTsynth?

You can pledge £10 and support the campaign without a reward, For £19 you’ll get a limited edition Modal T shirt and for £99 you’ll get a CRAFTsynth (£119 inside the EU). Various bundle options are available. Head over to the Kickstarter page to find out more.

• Monophonic wavetable synthesiser

• 8 oscillators in total with 2 selectable waveforms and mixer stage

• 40 unique waveforms available split into 8 banks of 5 morphable waveform sets

• VA, digital and generative waves are available along with selections from the Modal 002

• Process and cross modulate waveforms with 1 of 16 oscillator modifiers including Frequency / Phase Modulation, Hard / Window Sync, Ring / Amp Modulation, Derez / Bitcrush, Wavefolders and Waveshapers

• Multi option Unison / spread to detune the 8 oscillators for a huge sound

• 3 x envelope generators for Filter, Amplitude and Modulation

• 2 x audio rate LFOs

• 8 slot modulation matrix with 8 sources, each source can have 1 destination. (LFO1, LFO2 and MOD-EG assignable from CRAFTsynth, Velo, Note, ModW, AftT and Expression assignable from MODALapp)

• Program and transpose patterns with the built in sequenced arpeggiator

• 2-pole resonant filter that can be morphed from low pass, through band pass, to high pass

• Delay and distortion (waveshaping overdrive, not bitcrushing) effects

• Optional MIDI clock sync for LFOs and Delay

• 64 preset storage locations

• 8 key touch MIDI keyboard with 8 custom scales and root note selection

• MIDI DIN in and out

• Analogue clock sync in and out (configured to the KORG / Teenage Engineering specification)

• Class compliant MIDI provided over USB connection to host computer or tablet

• Headphone and line output

• Powered by USB or 3 x AA batteries

• Optional software editor available for macOS, Windows, iOS and Android

• Portable and compact design

• Dimensions: 150mm x 135mm x 68mm (6”x5 1/2”x 3”)