Ableton | Live 10.1.2 is fully compatible with Catalina. Live 10.1.1 and all earlier versions of Live 10 are not compatible with Catalina. Live 9 contains certain components which are no longer supported on macOS 10.15. Therefore if you update your operating system to macOS 10.15, Live 9 is not expected to even launch. The last officially supported version of macOS with Live 9 is macOS 10.13 (High Sierra). We strongly advise not to update your operating system to macOS 10.15 if you wish to continue using Live 9. We will not be releasing any further updates for Live 9. Live 9 is not compatible with Catalina as it contains certain components which are no longer supported on macOS 10.15. The last officially supported version of macOS with Live 9 is macOS 10.13 (High Sierra). | 09/10/2019 | https://help.ableton.com/hc/en-us/articles/360009770040 | Yes |
Accusonus | Accusonus has given us this exclusive statement... "All Accusonus products are compatible with macOS Catalina except for Drumatom. Before upgrading to macOS Catalina, make sure that your host is compatible with Catalina. If your host is not compatible, our advice is to remain on your current version of macOS until further notice." | 01/03/2020 | https://support.accusonus.com/hc/en-us/articles/360010295620-macOS-Catalina-Compatibility | Testing |
Acon Digital | Acon Digital is working through its range of products. So far there are Catalina versions of DeVerberate, DeFilter, Verberate 2, Verberate Immersive 2, Acoustica, Mastering Suite and Multiply. Check their website for the latest info. | 28/05/2020 | https://acondigital.com/?s=catalina | Yes |
Acustica Audio | Acustica Audio products are not supported under macOS 10.15. Please do not install macOS Catalina for the time being. We are analysing the situation and currently conducting tests to offer full compatibility as soon as possible. However, we strongly advise you do NOT update to macOS Catalina to avoid compatibility issues and/or loss of data. | 19/09/2019 | https://www.acustica-audio.com/pages/support/mac-os-15-compatibility-issues | No |
AIR Music Tech | AIR Music has been actively testing all current software with each release of macOS 10.15 Catalina to guarantee our users know exactly what works before they make the jump to the new operating system. We encourage all of our users to remain on their current OS until a full statement announcing software compatibility is made. This page will be updated to reflect product compatibility following the release of macOS 10.15 Catalina.<br />If you do not see your AIR Music software on the list, it has not yet been qualified for support on macOS 10.15 Catalina. This list will be updated as necessary to reflect changes to software compatibility. | 28/05/2020 | https://www.airmusictech.com/kb/article/2479 | Testing |
AJA | Desktop Software v15.5 boasts full compatibility with macOS Catalina, and new support for Metal on macOS. These enhancements mean increased speed and creative support on Mac laptops and workstations including the new Mac Pro, where KONA 5 with its support for resolutions all the way up to 8K is a sure-fire winning partner. | 21/09/2019 | https://www.aja.com/news/top-stories/848 | Yes |
Akai Professional | Akai say "We encourage everyone to remain on your current OS until all of your products are on this list and confirmed supported. This will be kept updated as necessary to reflect all current support for macOS Catalina 10.15 and iOS 13." Check the Catalina website for the latest info on Catalina support. | 28/01/2020 | https://www.akaipro.com/kb/macos-10-15-catalina-support-for-akai-pro/ | Testing |
Alesis | Alesis say "We encourage everyone to remain on their current OS until all of your products are on this list and confirmed supported. This will be kept updated as necessary to reflect all current support for macOS Catalina 10.15." Check their website for the latest information. | 28/01/2020 | https://www.alesis.com/kb/article/2480 | Testing |
Algoriddim | They are reported as saying "Users of djay Pro are already equipped to continue using their iTunes music libraries, now managed by the “Music” app, on macOS Catalina. We are planning to support Catalina with djay Pro on launch date of Catalina." | 18/09/2019 | https://djtechtools.com/2019/09/15/will-the-end-of-itunes-break-dj-software-in-macos-10-15-catalina/ | No |
Allen and Heath | Please note - The correct operation of DAW Control with macOS Catalina is not yet verified by our development and test departments.<br />As a result, macOS Catalina is not officially supported by Allen & Heath at this time. | 28/05/2020 | https://www.allen-heath.com/daw-control/ | No |
Antares | All of our current Auto-Tune editions are now supported for use with macOS 10.15 Catalina (provided that your DAW also supports Catalina). This includes Auto-Tune Pro, Auto-Tune Artist, Auto-Tune EFX+, Auto-Tune Access, and Auto-Key. <br />Avox 4, and the individual plugins that make up the Avox bundle are not yet updated for Catalina support. However, it is possible to install and run them on Catalina. If you encounter an error message when running the Avox installer on Catalina, please right-click or control-click on the installer and choose "Open." This will give you the option to run the installer. | 28/01/2020 | http://support.antarestech.com/support/solutions/articles/26000038373-compatibility-with-macos-10-15-catalina | Yes |
Antelope Audio | As of 6.01.2020, all Antelope Audio devices in the product list are compatible with macOS Catalina. All users will receive an automatic update with new versions of the launcher that carry out the compatibility settings! Devices that are not listed will receive only manager server updates in order to ensure compatibility with macOS Catalina | 07/01/2020 | https://en.antelopeaudio.com/2020/01/antelope-audio-product-compatibility-with-macos-catalina/ | Yes |
Apogee | Apogee is pleased to announce compatibility with the release of macOS Catalina and iOS 13. Please see the macOS Catalina (10.15) and iOS 13 compatibility status for each product in their support article.<br /><br />Note that their Thunderbolt products like the Element, Ensemble and Symphony interfaces are not yet compatible with macOS Catalina. They state that "Compatibility To Be Announced" | 14/10/2019 | https://apogeedigital.com/home-feature-news/macos-catalina-compatibility-info | Yes |
Applied Acoustics Systems | Following the release of Apple’s macOS Catalina (10.15), they have conducted a series of tests on our current lineup of instruments and they have found no issues with either the standalone applications or the plug-ins. <br /><br />Re-installing our instruments from scratch on macOS Catalina requires that you download the latest installers either from the Support or your Registered Products page.<br /><br />Check their macOS Catalina compatibility page for a full list of macOS Compatible products and a list of legacy products that are not macOS Catalina compatible. | 01/03/2020 | https://www.applied-acoustics.com/support/macos-catalina-compatibility/ | Yes |
Arturia | Our virtual instruments and effects are now compatible with macOS 10.15 Catalina. Before upgrading, please make sure your DAW, third party plug-ins and your hardware devices drivers are compatible with it as well. Also keep in mind that 32-bits applications and plug-ins are not longer supported by MacOS Catalina. Best regards, The Arturia team<br /> | 28/01/2020 | https://www.arturia.com/faq/utilization/compatibility-with-macos-catalina | Yes |
ATTO Technology INC | ATTO has announced via email that their products been tested compatibility and support of the newly released macOS® Catalina and that they are ready with support for the impending Apple Mac Pro® 2019.<br /><br />"ATTO products are the highest-performing storage connectivity solutions available for Mac® environments and provide future-proof compatibility with Catalina and Mac Pro 2019. The broad portfolio of ATTO network and storage connectivity products tested for Macs include ATTO Celerity™ Fibre Channel HBAs, ATTO FastFrame™ Ethernet adapters, ATTO ExpressSAS® HBAs, and ATTO ThunderLink® Thunderbolt™ adapters.<br /><br />ATTO has made new software tools available specifically for macOS Catalina that will enhance data-intensive and media production workflows. ATTO Xtend SAN iSCSI Initiator version 5.5 allows high availability with load balancing and failover for iSCSI storage on Macs over Ethernet. ATTO Disk Benchmark for macOS is the same industry-leading benchmark tool for Windows® developed exclusively for Macs." | 08/10/2019 | | Yes |
Audient | Audient report that the Sono, iD44, iD14, iD4 and iD22 interfaces are approved for macOS Catalina. See the website for more info. | 28/01/2020 | https://support.audient.com/hc/en-us/search?utf8=%E2%9C%93&query=catalina | Yes |
Audified | Most of Audified products are already notarized and they work normally.<br /><br />Catalina requires notarization, approval of the plug-ins and apps by Apple. We did all the necessary steps towards the notarization and most of our key products should work properly on Catalina. However, you may still expect updates to our products including some feature changes (MixChecker, MixChecker Pro, TNT VE, U73b).<br /><br />Do not hurry with the upgrade to Catalina, especially some DAW's may cause problems. Respect your DAW producer recommendations related to Catalina. | 19/12/2019 | https://shop.audified.com/blogs/news/macos-catalina | Testing |
Audio Assault | Audio Assault report that Duality Bass Studio is macOS Catalina compatible | 28/01/2020 | https://audio-assault.com/duality.php | Yes |
Audio Damage | We understand that this message was sent out by email to users... "As far as we're aware, our products are all Catalina-ready. However, with such a big change, we suggest waiting to upgrade until you hear from your DAW developer that your DAW of choice is compatible. As a recognized Apple developer, we are not technically subject to Notarization in its early stages; we are, however, Notarizing all updates as we release them.<br /><br />To deal with the ongoing changes to macOS, we have begun a series of rolling updates to maintain compatibility. While doing these, we have to remove 32-bit compatibility on macOS for products that still had it, and are ending our support for 32-bit macOS. Eos 2, Discord 4, and Filterstation 2 have all been updated to have Notarized installers and had their 32-bit mode removed, with all other products to follow." | 21/09/2019 | | Testing |
Audio Ease | The latest Snapper 3 is a fully 64 bits application supporting the latest macOS version 10.15 (Catalina).<br />The latest Altiverb 7 is a fully 64 bits application supporting the latest macOS version 10.15 (Catalina).<br />The 360pan suite 3.2.0 for macOS only and thus update adds support for macOS 10.15 (Catalina).<br />BarbaBatch 5 is 64 bits and supports macOS 10.15 Catalina<br />Make A TestTone will run as a 64 bit application under Catalina<br /><br />Note that Indoor is still not listed as macOS Catalina compatible | 28/05/2020 | | Testing |
AudioGaming | Are yet to make a statement regarding macOS 10.15 Catalina compatibility. As soon as we have any news we will update this entry. | 21/09/2019 | | No Info |
Audionamix | Are yet to make a statement regarding macOS 10.15 Catalina compatibility. As soon as we have any news we will update this entry. | 18/09/2019 | | No Info |
Audiority | We are working to update all of our plugins to make them fully compatible with Mac OSX Catalina. Here’s a list of the updated plugins as for May 25th, 2020:<br /><br />– Distortion 1<br />– Echoes T7E mkII<br />– GrainSpace<br />– Heavy Pedal<br />– L12X<br />– LDC2 Compander<br />– PlexiTape<br />– Polaris<br />– Pre X7<br />– Solidus VS8100<br />– The Abuser<br />– TS-1 Transient Shaper<br />– Tube Modulator<br />– XenoVerb | 25/05/2020 | https://www.audiority.com/2019/11/07/mac-osx-catalina-support-list/ | Yes |
Avid | UPDATE: As of June 23rd 2020, Avid announced that Pro Tools 2020.5 is supported with macOS 10.15.5. However, be aware that macOS 10.15.4 is NOT supported. When recording or playing back audio, the OS may lock up and require a hard reboot. Avid has found that Thunderbolt 2 spinning disk drives are more susceptible to this issue. Until further notice, Avid recommends that you continue to run Pro Tools on macOS 10.15.3 or macOS 10.15.5 and refrain from installing macOS 10.15.4. <br /><br />Pro Tools 2019.12 now supports macOS Catalina, though support for some file types and functionality is not yet available due to the 64-bit transition. Check the link to get all the details.<br /><br />Avid has now announced that the Avid Link 2019.10 and later as well as Sibelius 2019.9 are now macOS Catalina compatible with Media Composer listed as "Coming Soon". Avid has tweeted that it is slated for a January 2020 release.<br /><br />With regard to iOS 13, Avid has announced that Pro Tools Control 2019.9.1 is compatible with Apple's latest iOS software. | 23/06/2020 | https://www.pro-tools-expert.com/home-page/2019/12/17/pro-tools-201912-avid-announce-upgrade-with-macos-catalina-support | Yes |
Basehead | Basehead has stated on their website that with the release of V5.2 that Basehead is compatible with macOS Catalina (10.15). | 18/09/2019 | https://baseheadinc.com/index.php/july-2019-update/ | Yes |
Behringer | Are yet to make a statement regarding macOS 10.15 Catalina compatibility. As soon as we have any news we will update this entry. | 18/09/2019 | | No Info |
Blue Cat Audio | So Mac OS 10.15 Catalina is finally here! We would like to share with you a quick status update following up our survival guide for Mac OS Catalina.<br /><br />We still do not recommend to update for the moment, of course, but regarding our plug-ins, it should be mostly fine, as far as we can tell (there are not many host applications and audio interfaces that can be used for testing).<br /><br />Here are the details:<br /><br />Most plug-ins and applications will run fine, once they have been installed (see our survival guide for more details on how to install).<br />Some older plug-ins (namely the Remote Control, FreqAnalyst Pro, StereoScope Pro, Liny EQ plug-ins, and the Parametr’EQ series) will not load, unless you allow them one by one in the security pane, after they first failed loading:<br /><br />Our third party plug-ins hosts (Axiom, PatchWork, Late Replies and the MB-7 Mixer) will be able to load only plug-ins that are compatible with Catalina.<br />We will keep you updated as more applications become available for Catalina. Feel free to contact us if you have any problem, or on the contrary a successful upgrade! | 02/11/2019 | https://www.bluecataudio.com/Blog/tip-of-the-day/mac-os-10-15-catalina-status-update/ | Testing |
Bombich | Bombich recommends Carbon Copy Cloner 5.1.10. This update offers qualification against macOS 10.15 Catalina, but also includes improvements for pre-Catalina OSes, so we recommend this update for all CCC 5 users. Please follow macOS Catalina Known Issues for information on issues related to the new OS. | 18/09/2019 | https://bombich.com/kb/ccc5/release-notes | Yes |
Boss | Compatibility with macOS Catalina (macOS 10.15) will be verified and announced after the release of macOS Catalina (macOS 10.15). They also list a range of products that they expect not to work with Catalina. The list is now mainly populated with 'Yes' but do check using the link to make sure that your product is approved. | 28/05/2020 | https://www.boss.info/global/support/support_news/19091015b/ | Testing |
Boz Digital Labs | Boz Digital Labs have given us this exclusive statement... "Our plugins work in Catalina, but users will need to go into their security preferences in order to install new plugins. Once installed, the plugins will function normally." <br /><br />This means if you have the latest versions already installed when you upgrade to macOS Catalina the Boz Digital Labs plugins should work. However, if you need to install Boz Digital Labs plugins on a macOS Catalina system then you will need to follow the right click process to bypass the security measures added in Catalina.<br /><br />They are in the process of notarizing all their installers and will upload them as soon as this has been done. | 24/10/2019 | https://www.bozdigitallabs.com/catalina-compatibility/ | Testing |
Cedar Audio | We have been working for many months to make CEDAR Studio compatible with MacOS 10.15 Catalina. Our software team is fully focussed on this but, for reasons beyond our control, it is taking longer than we had anticipated. Please be assured that we will release a new version of CEDAR Studio as soon as possible. In the meantime, thank you for your patience. We know that this issue is causing inconvenience, and we would like to apologise for this. | 28/05/2020 | https://www.cedar-audio.com/products/cedarstudio/cedarstudio8.shtml | Testing |
Celemony | Melodyne 4.2.4 has just been released and is compatible with Apple’s new operating system, macOS 10.15 Catalina, but older versions of Melodyne are not. Here we explain what you need to know on the subject.<br /><br />Catalina brings far-reaching technical changes that also affect DAWs, plug-ins and hardware drivers, so many manufacturers will have to adapt their software to Catalina, otherwise it may be impossible to install or even use it.<br /><br />Melodyne 4<br />All editions (essential, assistant, editor and studio) of the new Melodyne version 4.2.4 have already been adapted to Catalina and are compatible with it. As a Melodyne 4 user, you can download the free update in your user account. However, you have to make sure that your DAW and all the required drivers have also been cleared to run under Catalina.<br /><br />Older versions of Melodyne<br />Melodyne studio 3 as well as versions 1 and 2 of Melodyne editor, assistant and essential are not compatible with the changes introduced by macOS Catalina and can therefore not be used with the new operating system. Therefore, we offer customers with older versions the update to Melodyne 4 free of charge or at a special price.<br /><br />Capstan<br />Celemony has released the new version 1.3.2 of Capstan, their wow and flutter removal tool. This free update is compatible with macOS Catalina and comes with a few minor bug fixes and improvements. | 18/11/2019 | https://www.celemony.com/en/macos-catalina | Yes |
Classic SmartMusic | After thorough testing, classic SmartMusic is not expected to function correctly on Apple's macOS 10.15, Catalina. Additionally, the classic SmartMusic iPad app is not compatible with iPadOS 13. <br />We highly recommend not updating beyond supported MacOS and iPadOS versions on any computers running the program.<br />If you have already updated to macOS 10.15 or iPadOS 13, you will need to either use SmartMusic on an alternate device or contact Apple support for information on rolling back the update. <br />As classic SmartMusic is retiring after August 31, 2020, it will not be updated to support these operating systems. Please note, our technical support team will not be able to provide support for devices running these operating systems. | 23/10/2019 | https://makemusic.zendesk.com/hc/en-us/articles/360035300513?input_string=macos+catalina+compatibility | No |
Cytomic | Are yet to make a statement regarding macOS 10.15 Catalina compatibility. As soon as we have any news we will update this entry. | 21/09/2019 | | No Info |
DDMF | DDMF has emailed a statement to all their users... "As you may or may not have heard, with Catalina, the new Mac operating system that will be released this month, support for 32-bit software is abandoned. This has important consequences for a number of DDMF products: Bridgewize and Metaplugin, which both offer the possibility to use your old 32-bit plugins in a 64-bit host, will no longer be able to do that under Catalina. There is no technical workaround for this, also none of the competitor products that offer bit bridging will continue to work under Catalina. So if you want to keep using your old and beloved 32-bit plugins, you will have to stay on OSX 10.14 or lower! This, of course, also applies to the 32-bit version of Plugindoctor, which will no longer work with OSX 10.15.<br /><br />A second change that will come with Catalina is that all software that is not being sold directly via iTunes (such as DDMF and almost all other non-Apple audio software) will now have to undergo a process called "notarization" in order to continue to work under Catalina. The exact consequences of non-notarized software are, I have to admit, not yet entirely clear to me; also, in reaction to a lot of developers complaining about this new requirement, Apple has decided to relax the restrictions a bit until January 2020, but anyway, be prepared for some unforeseen issues with not only DDMF software, but 3rd party software in general when updating to Catalina.<br /><br />To summarize, if you plan to keep using 32-bit software (plugins or otherwise) you cannot update to Catalina. Even if you are all set for 64 bit exclusively, I'd advise you to not update immediately, but first wait a few weeks until it has become clear whether the new notarization requirements lead to significant issues." | 21/09/2019 | | No |
Denon DJ | Supported Hardware<br />The following products will work with macOS 10.15 Catalina without any need for additional drivers.<br /><br />DS1**<br />MC2000<br />MC3000<br />MC4000**<br />MC7000**<br />MC6000MKII**<br />MCX8000 - see details below<br />PRIME 4<br />SC5000 PRIME<br />SC5000M PRIME<br />X1800 PRIME<br />** Editor, utility, and/or firmware updater software for these products are not currently supported. This page will be updated as necessary to reflect all current support for macOS Catalina.<br /><br />Please be aware: If you do not see your product listed in this article, it is not officially supported for use with macOS Catalina at this time.<br /><br />MCX8000 Support<br />The MCX8000 is now officially supported for use with macOS Catalina 10.15 when used with the v1.0.3 macOS driver. <br /> | 28/05/2020 | https://www.denondj.com/kb/macos-10-15-catalina-support-for-denon-dj/ | Yes |
Digital Audio Denmark (DAD) | DAD has given us this exclusive statement... "The current version of the DADman software does not support Catalina. A new version of the DADman software for DAD AX32, DX32R and Avid MTRX is currently in development. This version will, in addition to offering new features, will also include support for Catalina. We currently estimate it will be released by January 2020 at the latest." | 24/10/2019 | | No |
DMG Audio | DMG Audio send us an exclusive statement. "All our products are Catalina compatible and requirements have been updated on our website" | 27/02/2020 | https://dmgaudio.com/ | Yes |
DNA Music Labs | Are yet to make a statement regarding macOS 10.15 Catalina compatibility. As soon as we have any news we will update this entry. | 18/09/2019 | | No Info |
Dolby Labs | Dolby Labs have told us that they are working on macOS Catalina and advise users not to update to macOS Catalina at this time. They also wanted to stress, like many plugin developers, that it is essential that you do not upgrade to Catalina until your host DAW supports Catalina. | 23/10/2019 | | Testing |
DSP-Q | DSP-Q have advised us that DSP-Quattro Version 5.2 is now fully supported for macOS 10.15 Catalina and that the application is now “notarized” and compiled to be fully compatible with macOS 10.15 Catalina. | 09/10/2019 | https://www.dsp-quattro.com/dspquattro/Site/product.html | Yes |
EastWest | EastWest has released Play 6.1.7 which is the first version that is macOS Catalina compatible. Although the Update page does not expressly state Catalina support it does state that Play 6.1.7 does not support 32-bit, which means it is a fully 64-bit application. <br /><br />EastWest Installation Center 1.3.7 is now notarized for Mac OS Catalina<br /><br />EastWest Sounds is now fully compatible with NKS and can be used in NI Komplete Kontrol keyboards, software and Maschine. EastWest Sounds can also be browsed and previewed. Instrument parameters are pre-mapped to NI hardware and software. | 29/01/2020 | http://www.soundsonline.com/Support?section=updates | Yes |
Econ Technologies | Econ Technologies have released news versions of ChronoSync and ChronoAgent that are Catalina compatible. They have also issued a ChronoSync Catalina Tech Note which they recommend you read before updating to Catalina. This Tech Note explains the changes and offers suggested 'Best Practices' as you make your move to macOS Catalina (10.15). | 10/10/2019 | https://www.econtechnologies.com/chronosync/TN-CS-Catalina-Update.html | Yes |
Editors Keys | Are yet to make a statement regarding macOS 10.15 Catalina compatibility. As soon as we have any news we will update this entry. | 18/09/2019 | | No Info |
e-instruments | As a manufacturer of sample-based products all of our products are Catalina ready, providing that you have installed DAW hosts or host plugins that are Catalina supported.<br /><br />Kontakt based Instruments (Kontakt 5 / Kontakt 6 required for Catalina )...<br />Session Keys S, Session Keys Y, Session Keys Upright, Session Keys R, Session Keys S, Session Keys W, Session Horns, Session Horns Pro, Session Strings 2 and Session Strings Pro 2<br /><br />Ableton Live based Instruments (Live Version 10.1.2 required for Catalina)...<br />Studio Grand Series and Studio Bass<br /><br />Halion Based Instruments (most recent eLicenser software required for Catalina)...<br />Vibrant<br /><br />Reason based Instruments (Reason 10.4.1 required for Catalina)...<br />StringWerk<br /> | 30/01/2020 | | Yes |
Eiosis | Are yet to make a statement regarding macOS 10.15 Catalina compatibility. As soon as we have any news we will update this entry. | 21/09/2019 | | No Info |
Eventide | Eventide has emailed a new statement to their users, headed "All Eventide Plug-ins are now compatible with macOS 10.15 Catalina".<br /><br />Note: Plugin presets and documentation have been moved from the user Documents directory to Music, and the new installers will move any custom presets you have saved in the old location. This is true for all versions of macOS, but Catalina users will be prompted to grant the installer permission to modify the ~/Documents directory. | 18/11/2019 | https://www.eventideaudio.com/community/forum/plug-ins/macos-1015-catalina-support-info | Yes |
FabFilter | All our current installers are already notarized and compliant. They run on macOS Catalina without any issues. The latest installer of Pro-Q 2 and Pro-L 1 should also work on macOS Catalina! These are also notarized. | 02/11/2019 | https://www.fabfilter.com/forum/5937/will-all-fabfilter-plugins-work-in-macos-catalina?replies=0 | Yes |
Finale | Finale 26.2 (released 11/19/19) is considered compatible with macOS 10.15 Catalina. This is a free maintenance update for users that own Finale v26. It is recommended that all users apply this update. The installer can be downloaded with the in-app updater under the Finale menu by selecting Check for Update... or you can get the full installer from your My Software page by logging into your MakeMusic account.<br /><br />Finale v25.5 is not compatible with macOS 10.15 Catalina, and we will not release any maintenance updates for this version. Finale v25.5 users still qualify for technical assistance from our Customer Support team on compatible operating systems — macOS 10.10 through 10.14 — but we cannot provide support for this version on Catalina or future Apple operating systems. | 29/01/2020 | https://makemusic.zendesk.com/hc/en-us/articles/360036288573?input_string=macos+catalina+compatibility | Yes |
Flux:: Sound and Picture Development | Flux: has recently made this announcement "If your DAW is already compatible with macOS Catalina you shouldn’t encounter any issue with FLUX:: products." | 06/04/2020 | https://www.facebook.com/FluxImmersive/posts/2975074852535977 | Yes |
Focusrite | Focusrite have a macOS Catalina compatibility page on which they state... "Our testing was conducted using various beta versions of macOS Catalina and we will be testing the final "Golden Master" version of 10.15 as soon as it's available. We would not recommend updating to macOS Catalina while it's in the public beta stage as we don't provide support for pre-release operating systems.<br /><br />Newer updates to Catalina (e.g. 10.15.x) may potentially alter the performance of some products compared to the original 10.15 release, though significant changes in this regard throughout the lifecycle of a version of macOS have historically been rare.<br /><br />Please check that all other software/hardware you use to make music is also compatible before updating and never update your operating system during the middle of a time-critical project. If you're using additional software that came bundled with your Focusrite interface (e.g. Ableton Live Lite, Pro Tools First) then please check the corresponding manufacturer's website for compatibility information.<br /><br />Based on past experience we would generally advise waiting for a at least a few months after the release of any new operating system before updating in case there are any initial issues which need to be patched." | 29/01/2020 | https://support.focusrite.com/hc/en-gb/articles/360009481180-Focusrite-product-compatibility-with-macOS-10-15-Catalina- | Yes |
Fuse Audio Labs | On November 15th 2019 Audio Fuse Labs announced that V2.0 of their plugins provided full compatibility with Mac OS Catalina (10.15), with fully notarized pkg installers. They also note that removing 32-Bit support on Mac OS was a side-effect of the new build tools / Catalina update. | 15/11/2019 | | Yes |
FXpansion | We're pleased to say we've been able to repackage the following legacy products, to allow them to install and run on macOS Catalina - these can now be downloaded from your FXpansion account:<br /><br />- DCAM Synth Squad<br />- Tremor<br />- Bloom<br />- Etch<br />- Maul<br /><br />Work is continuing on updates to BFD3 and BFD Expansions, and we hope to bring you news very soon of when these updates will be available.<br /><br />We're very pleased to announce that a new public beta version of BFD3, v3.3.1.31, is now available to download from your account. This version is currently only available for Mac users, but we'll be releasing a Windows build very shortly that introduces similar updates (excluding Catalina support).<br /><br />Please note that we have also released an update for FX License Manager, v2.1.0.14, which significantly improves the speed and reliability of the BFD3 Core Library download, and is included in the BFD3 v3.3.1.31 installation or can be downloaded from the bottom of your account page.<br /><br />The following FXpansion instruments are now considered legacy products and as such will receive no further updates or support to ensure continued compatibility with modern operating systems and DAW hosts:<br />Bloom<br />DCAM Dynamics<br />DCAM SynthSquad<br />SynthSquad Packs<br />DR008<br />Etch<br />Guru<br />Geist<br />BFD Eco<br />BFD1<br />BFD2<br />Maul<br />Tremor<br />VST AU Adapter<br />VST RTAS Adapter | 20/03/2020 | https://www.fxpansion.com/forum/viewtopic.php?f=3&t=8259997&sid=970a5d858af7a548f594e411a39482d5&start=105 | Yes |
Garritan | Currently, macOS 10.15 Catalina is not considered within the system requirements for the Garritan Instrument libraries. We are continuing to do testing with these libraries on this OS and will provide more information as it becomes available. While we do not expect any critical issues if you upgrade to Catalina, we are currently unable to provide support for Garritan libraries on this OS.<br /><br />There is only one known issue which is exclusive to the CFX Concert Grand and the CFX Lite libraries. Users may encounter an issue where the installer may hang during the installation process and fail to complete. Situations, where the library is already installed, may not encounter any issues, but be aware that if the need to reinstall arises, this issue then may affect any reinstall attempts. | 09/11/2019 | https://makemusic.zendesk.com/hc/en-us/articles/360038684493-Garritan-Instruments-with-macOS-10-15-Catalina | Testing |
GForce | We have been working diligently updating our instruments to offer full compatibility with macOS 10.15 Catalina. At the time of writing, our instruments are not yet fully compatible with the new macOS. As a musician, engineer or producer we recommend you DO NOT upgrade to macOS Catalina until you are certain that all your software applications and plug-ins are fully compatible with the new system software so that your studio work remains uninterrupted. We will make future announcements about macOS Catalina compatibility on our website here. | 21/09/2019 | https://www.gforcesoftware.com/support/faqs/do-gforce-instruments-work-macos-1015-catalina | Testing |
Goodhertz | Our latest version has been updated for macOS Catalina. | 29/01/2020 | https://goodhertz.co/faq#are-goodhertz-plugins-compatible-with-the-latest-macos-catalina | Yes |
HOFA | HOFA has posted this announcement on their home page... "macOS Catalina: All HOFA Plugins have successfully been tested on macOS 10.15 with the DAWs that are already compatible. For DDP Player Maker an update (V2.5.1) is available." | 19/11/2019 | https://hofa-plugins.de/en/ | Yes |
Hornet Plugins | This is our situation with Catalina:<br /><br />All the plugins work if you download them with Safari, if you use any other browser once you unzip the archives macOS applies a “quarantine” flag that prevents the os from loading the plugin.<br /><br />This is because we don’t use installers so we cannot sign+notarize them, we provide a command to be run before copying the plugins in their folders to remove that flag. After the quarantine flag is removed everything works fine.<br /><br />We know this is not a good solution so we are working on a downloader/installer to solve this situation, it’s not ready though.<br /><br />Regarding our apps or standalone version of the plugins, none of them are notarized yet, we are releasing an update to our euclidean sequencer RhyGenerator in the beginning of next month that will provide a notarized version of the standalone so this will be our first Catalina compatible app.<br /><br />We will also release an update to BSharry Key detector next month to make it Catalina compatible. | 09/10/2019 | | Testing |
Icon Pro Audio | All of the latest Icon Pro Audio iMaps are now macOS 10.15 Catalina compatible. If your Mac computer is running Catalina, you may now use Icon’s iMap software to update your device firmware or program midi mapping.<br /><br />All new iMaps are available on your device’s homepage on this website. If you have any questions or comments, please visit our Help Center for more information. | 28/05/2020 | https://iconproaudio.com/important-info-about-macos-catalina/ | Yes |
IK Multimedia | UPDATE 27 January 2020: Miroslav Philharmonik 2 now compatible and available in your IK User Area<br /><br />UPDATE 19 December 2019: Syntronik 1.2.0b, UNO Synth Editor 1.1.0b and UNO Drum Editor 1.1.0b now Catalina compatible and available<br /><br />UPDATE 13 December 2019: Lurrsen Mastering Console 1.1.0b update adds Catalina compatibility and is now available<br /><br />UPDATE 10 December 2019: MODO BASS update and Catailna compatibility schedule now available<br /><br />UPDATE 29 November 2019: T-RackS 5.2.2 update now available and fully macOS 10.15 Catalina compatible<br /><br />UPDATE 25 November 2019: New AmpliTube 4 version 4.9.0 update includes full macOS 10.15 Catalina support<br /><br />UPDATE 19 November 2019: SampleTank 4.0.9 update is now available and fully macOS 10.15 compatible<br /><br />UPDATE 30 October 2019: The new Hammond B-3X 1.1 update is now fully macOS 10.15 Catalina compatible | 27/01/2020 | https://www.ikmultimedia.com/news/?item_id=8464 | Yes |
iZotope | iZotope have updated their macOS Catalina status. All currently sold products on our website have been updated for macOS Catalina. These can be downloaded via our Product Portal, or directly from your account.<br /><br />Updated products include:<br />Ozone 9, Neutron 3, Nectar 3, RX 7, RX Loudness Control, Dialogue Match, Insight 2, Trash 2, BreakTweaker, Stutter Edit, Iris 2, VocalSynth 2, Relay, Visual Mixer, Vocal Doubler, Ozone Imager 2, Mobius Filter, DDLY, Tonal Balance Control 2 and All Exponential Audio reverb products | 28/05/2020 | https://support.izotope.com/hc/en-us/articles/360039511813-macOS-Catalina-for-iZotope-products | Yes |
Kazrog | All current Kazrog plugins support macOS Catalina.<br /><br />For legacy Kazrog plugins, we have provided notarized installers, and all legacy Kazrog plugins have always supported 64 bit, so your existing sessions with legacy Kazrog plugins should function as you expect them to. | 01/11/2019 | https://kazrog.com/blogs/news/macos-catalina-full-support-announced | Yes |
Klevgrand | Klevgrand have given us this exclusive statement... "All our desktop plugins are notarized and compatible with Catalina." | 08/10/2019 | | Yes |
Korg | Oct. 31st, 2019 - List of supported products with macOS Catalina<br />- KORG Gadget 2 for Mac<br />- KORG Gadget 2 Plugins for Mac<br />- KORG Collection for Mac<br /><br />Products that we have discovered current compatibility issues with macOS Catalina...<br />- KORG USB-MIDI Driver (and each product that uses it)<br />- KROME Editor / Plug-In Editor - KROSS Editor / Plug-In Editor<br />- KROSS2 Editor / Plug-In Editor<br />- KRONOS Editor / Plug-in Editor<br />- AudioGate 4<br />- AudioGate Recording Studio<br />- DS-DAC-10R Driver<br /><br />List of unsupported products (will not work with Catalina)<br />- DS-DAC Driver (DS-DAC10, 100, 100m)<br />- microX/X50 Editor / Plug-In Editor<br />- M3 Editor / Plug-In Editor<br />- M50 Editor / Plug-In Editor<br />- PS60 Editor / Plug-In Editor<br />- microStation Editor / Plug-In Editor | 26/11/2019 | https://www.korg.com/us/news/2019/0911/ | Testing |
Krotos | Krotos have posted this announcement on their website... "As some of you may know, Apple will soon be releasing a new version of OSX; Catalina. Apple is making a series of changes to the way the OS works, which will have a knock-on effect on some audio software.<br /> <br />Like many developers, we will need some time to update our processes to meet their new standards for 3rd Party software.<br /> <br />We strongly recommend that all Mac-based users of Krotos products wait to upgrade to this new OS for the time being. On release, Krotos products will not support this version of OS X.<br /><br />We recommend you turn off automatic updates on your Mac to stay in control of your software as these changes are rolled out by Apple, to avoid disruption to your workflow." | 09/10/2019 | https://www.krotosaudio.com/2019/10/02/macos-10-15-catalina/ | No |
Kuassa | We are updating all of our free and Commercial plug-ins along with including 64-bit versions for OS X and Windows. Get them here! | 29/01/2020 | https://www.kuassa.com/we-are-now-64-bit-compatible-for-pc-and-mac/ | Yes |
KV331 | On a forum someone asked "Is Synthmaster 1+2 Mac Catalina OSX compatible? Or is anyone running it on Catalina successfully? Eyeing the Everything Bundle On sale, but haven’t seen it listed anywhere and want to confirm first."<br />KV332 replied "Yes we are compatible with MacOs Catalina." | 08/05/2020 | https://www.kvraudio.com/forum/viewtopic.php?t=543605&p=7731827 | Yes |
Lexicon | Are yet to make a statement regarding macOS 10.15 Catalina compatibility. As soon as we have any news we will update this entry. | 18/09/2019 | | No Info |
Line 6 | As you may already know, Apple is releasing macOS 10.15 (Catalina). With a few exceptions, macOS 10.15 is supported by our currently active applications and drivers.<br />Below is a detailed rundown of compatibility issues for Line 6 products on a case-by-case basis. <br /><br />Editors:<br />• All currently supported editors will work as expected.<br />• The following editors are no longer supported at this time and will not work on Catalina:<br />Line 6 Edit<br />Vyzex<br />Backtrack Utility<br /><br />Updaters<br />• Line 6 Updater will work as expected.<br />• Line 6 Monkey is not compatible with macOS 10.15 (Catalina). A solution for Catalina customers to update firmware is in-progress.<br /><br />Drivers<br />• All currently supported drivers and devices work as expected except for the Helix custom driver.<br />• Helix class compliant audio works as expected.<br />• The Helix custom driver (which adds support for additional sample rates) does not yet work correctly.<br /><br />Plug-ins<br />• Currently, Helix Native and POD Farm 2 work as expected on all supported DAWs. As DAWs are updated to adopt Apple’s latest requirements and security measures, our plug-ins may need to be updated to continue working with those DAWs. We will work with DAW vendors to update Helix Native and POD Farm 2, but we cannot guarantee that they will not release updates that break our compatibility. | 02/11/2019 | https://line6.com/support/page/kb/general-faq/macos-1015-catalina-compatibility-r924/ | Testing |
LiquidSonics | LiquidSonics have posted a statement on their Facebook page... "All installers available online for the latest versions of LiquidSonics products have been refreshed to include a Catalina notarisation ticket. If you wish to install on a new Catalina system please re-download your installers before installing the plug-ins. If you plan an in-place upgrade to Catalina no further action will be required to use any LiquidSonics products already installed on your system." | 08/10/2019 | https://www.facebook.com/LiquidSonics/photos/a.482604448443371/2454386181265178/?type=3&theater | Yes |
Magma | Are yet to make a statement regarding macOS 10.15 Catalina compatibility. As soon as we have any news we will update this entry. | 21/09/2019 | | No Info |
MakeMusic | Finale 26.2 (released 11/19/19) is considered compatible with macOS 10.15 Catalina. This is a free maintenance update for users that own Finale v26. It is recommended that all users apply this update. The installer can be downloaded with the in-app updater under the Finale menu by selecting Check for Update... or you can get the full installer from your My Software page by logging into your MakeMusic account.<br /><br />Finale v25.5 is not compatible with macOS 10.15 Catalina, and we will not release any maintenance updates for this version. Finale v25.5 users still qualify for technical assistance from our Customer Support team on compatible operating systems — macOS 10.10 through 10.14 — but we cannot provide support for this version on Catalina or future Apple operating systems. | 20/11/2019 | https://makemusic.zendesk.com/hc/en-us/articles/360036288573 | Yes |
Mastering The Mix | Mastering The Mix has told us that all their plugins are now fully supported on Catalina. The latest updates can be downloaded using the More Info link in the database. | 30/10/2019 | https://www.dropbox.com/s/18a8zumv4a0zjr0/Mastering%20The%20Mix.zip?dl=1 | Yes |
Mathew Lane | Our plug-ins are ready for OSX Catalina | 25/10/2019 | https://www.facebook.com/MathewLaneDrMS/photos/a.358226394224852/2475532329160904/?type=3&theater | Yes |
M-Audio | Please find a list of our products and their support status below. We encourage everyone to remain on their current OS until all of your products are on this list and confirmed supported. This will be kept updated as necessary to reflect all current support for macOS Catalina 10.15 and iOS 13<br /><br />Note that the Class-compliant devices all seem fine but the hardware that requires drivers are not yet support. These include MIDISport 2x2 Anniversary, MIDISport 4x4 Anniversary, MIDISport Uno and M-Track Quad | 29/01/2020 | https://m-audio.com/kb/article/2482 | Testing |
McDSP | McDSP is excited to announce Mac OS Catalina support for its entire product line, available as a free update in McDSP plug-ins v6.7 and later. <br /><br />UPDATE<br />The latest Catalina compatible update from McDSP, v6.7.1, is now available. In addition to providing support for Mac OS 10.15 (Catalina), this update also improves graphics performance across the entire McDSP product line on all supported Mac OS releases. <br /><br />This update ensures McDSP software is compliant with all security requirements of Mac OS Catalina. Note as part of the requirements in Catalina, McDSP plug-ins are only supporting 64-bit versions going forward. <br /><br />UPDATE -Catalina Support Now Available for APB-16<br /><br />The APB plug-ins, APB driver, and APB Status application are all now available for Mac OS 10.15 (Catalina). These latest versions continue to support earlier versions of Mac OS, including High Sierra and Mojave. NOTE all three updates (APB plug-ins, driver, and status application) must be installed in order for your APB-16 hardware to function correctly. | 26/02/2020 | https://www.mcdsp.com/downloads/plugin-downloads/ | Yes |
Metric Halo | macOS Catalina (10.15) - All Metric Halo 3d Interfaces & MH Production Bundle Plugins are ready for macOS Catalina (10.15).<br /><br />Metric Halo Legacy and 2d Expanded Interfaces must be upgraded to 3d for macOS Catalina Compatibility.<br /><br />SpectraFoo is currently not compatible with macOS Catalina. If you depend upon SpectraFoo, please wait for a SpectraFoo update before upgrading to Catalina. | 09/10/2019 | https://www.facebook.com/MetricHalo/photos/a.193025994047349/3096728413677078/?type=3&theater | Testing |
Modartt | Modartt support tell us that both Pianoteq and Organteq are supported in macOS Catalina. | 31/01/2020 | | Yes |
MOTU | Apple has released macOS® Catalina (version 10.15). As of March 22, 2020, currently supported MOTU products are compatible with macOS Catalina. | 02/01/2020 | https://motu.com/en-us/news/motu-and-macos-catalina/ | Yes |
Native Instruments | After having conducted systematic tests, Native Instruments confirms full macOS Catalina compatibility with the latest versions of all current products*.<br /><br />IMPORTANT NOTE: macOS 10.15 terminates the operability of some NI legacy hardware. This includes MASCHINE MK1, AUDIO 2 / 4 / 8 DJ and TRAKTOR S4 / X1 MK1.<br /><br />The workaround for macOS 10.12 - 10.14 does not work on macOS 10.15. If you still want to use these legacy devices, do not update to macOS 10.15! | 25/11/2019 | https://support.native-instruments.com/hc/en-us/articles/360001890378-macOS-10-15-Catalina-Compatibility-with-Native-Instruments-Products | Yes |
Nektar | Nektar software has been tested and is known to be compatible with macOS 10.15 Catalina. However, the installers have yet to be notarized and so you will need to right-click and approve them before Nektar installers will work on Catalina. | 02/11/2019 | https://nektartech.com/macos-catalina-compatibility/ | Yes |
Neyrinck | Are yet to make a statement regarding macOS 10.15 Catalina compatibility. As soon as we have any news we will update this entry. | 21/09/2019 | | No Info |
Non Lethal Applications | Non Lethal Applications has given us this exclusive statement... "We have just released the first version of Video Slave and ADR Master to officially support macOS Catalina. It also includes other new features, improvements and bug fixes. | 04/12/2019 | https://www.facebook.com/NonLethalApplications/photos/a.804359216377083/1943808215765505/?type=3&theater | Testing |
Novation | Please check their macOS Catalina article for the latest info but currently the following products are supported with macOS Catalina...<br />Current Launchpad family (Launchpad Pro, Launchpad MK 2 (with RGB pads))<br />Launchkey MK 2 (green base)<br />Components: Circuit, Circuit Mono Station, Bass Station II, SL MK III, Peak, Summit and Launchkey Mini Mk3 <br />Audiohub 2x4<br />Impulse<br />Dicer<br />B-Station plug-in<br />V-Station plug-in<br /><br />The following Novation products are supported but with caveats...<br />MK 1 Launch family* (Launchpad S, Launchpad Mini, Launchkey MK 1 (orange base), Launchkey Mini)<br />The Launchpad MK1 [NOVLPD01] with serial number format [LP7000000000] is not compatible with OS Catalina. The Launchpad MK1 will be listed as a USB device in Mac's system report, but it will not be detected as a MIDI controller in any DAW and it will not send MIDI information. Note that Automap is no longer supported so Automap functionality is not available for these products on macOS Catalina (10.15).<br /><br />Launch Control, Launch Control XL<br />The Launch Control editors are 32 bit and will not currently run on macOS Catalina, our developers are currently investigating a solution. We apologise for the inconvenience. <br /><br />MiniNova<br />If driver and librarian have been installed before updating they will continue to work. Our developers are looking into a solution to allow you to install the software on 10.15.<br /><br />The following Novation products are not supported with macOS Catalina...<br /><br />SL MkII<br />Standard MIDI functionality works wth macOS Mojave, however, Automap does not work on Catalina. See the section regarding Automap below. <br /><br />UltraNova<br />We are aware of an issue whereby audio playback does not function. Please see Automap Compatability below<br /><br />Automap <br />We will no longer update or support Automap with future operating systems or software releases. Automap will still be available to use with currently supported operating systems. Automap initially set out to let users control their software using real buttons, encoders, and sliders. This was technically complex but Automap offered a unique way of connecting the hardware and software. Most major DAWs now have native solutions so any MIDI controller can have control over the software without the need for an additional third-party application like Automap. Controllers such as our SL MkIII and Launchkey keyboards have direct control of major DAWs via dedicated, native integration or the industry-standard HUI protocol. We recommend that you uninstall prior to updating to Catalina as the uninstaller will not run on Catalina.<br /><br />Novation Twitch<br /><br />Novation Nocturn | 30/01/2020 | https://support.novationmusic.com/hc/en-gb/articles/360009538680--Novation-product-compatibility-with-macOS-Catalina-10-15- | Testing |
Nugen Audio | Nugen Audio has provided us with this exclusive statement... “We have interim support set up for all of our current installers. This means that you can install them all provided you are connected to the internet at the time of installation. We have also implemented full notarization support in our build system, so all future updates will install both online and offline.” | 04/12/2019 | | Yes |
Numark | Please find a list of our products and their support status below. We encourage everyone to remain on their current OS until all of your products are on this list and confirmed supported. This will be kept updated as necessary to reflect all current support for macOS Catalina 10.15 and iOS 13<br /><br />Note that the Class-compliant devices all seem fine but the hardware that requires drivers are not yet support. These include 4Trak, DJiO, NS6, NS7, NS7II and V7.<br /><br />Note that the software EZVC and Mixvibes are also not currently supported either. | 30/01/2020 | https://www.numark.com/kb/article/2485 | Testing |
Oeksound | Oeksound Soothe2 is supported for macOS Catalina. Owners of the original Soothe are advised to upgrade to Soothe2 if they require Catalina support. | 30/01/2020 | https://oeksound.com/plugins/soothe2/ | Yes |
Output | Output has provided us with an exclusive statement... "Portal, Movement and Arcade are compatible with macOS 10.15 Catalina. However, all other Output software products that are based on Native Instruments Kontakt are not compatible and will be made compatible at the discretion of Native Instruments.” | 24/10/2019 | | Yes |
Overloud | Overloud products are macOS 10.15 Catalina ready If you are a TH-U Full, TH-U Rock, TH-U Metal or TH-U Funk and R&B you need to upgrade to the 1.1.3 version. Every other Overloud product does not require any update. Catalina compatibility cannot be guaranteed for discontinued products. | 02/11/2019 | https://overloud.com/news/overloud-products-are-macos-1015-catalina-ready | Yes |
OverTone DSP | OverTone DSP has given us this exclusive statement... "OverTone DSP Does not provide support for macOS 10.15 Catalina at this time. If possible, customers are advised to continue using a fully supported version of macOS to avoid potential compatibility issues." | 23/10/2019 | | No |
Penteo Perfect Surround | Are yet to make a statement regarding macOS 10.15 Catalina compatibility. As soon as we have any news we will update this entry. | 18/09/2019 | | No Info |
Pioneer DJ | rekordbox is now fully compatible with macOS Catalina. Check the article for more information. | 30/01/2020 | https://forums.pioneerdj.com/hc/en-us/community/posts/360048040612-Please-refrain-from-using-macOS-Catalina-10-15-bata | Yes |
Plugin Alliance | This free update includes bug fixes and improvements as well as compatibility with macOS 10.15 Catalina and the Windows 10 November 2019 Update for a big subset of Plugin Alliance products. You can find a detailed product list for this Maintenance Update below.<br /><br />Please note that this update is the first to remove 32-bit builds for the affected products that will from now on be present in a 64-bit version only. Please check your system configuration before updating to make sure you are compatible. Don't worry, we've got you covered in all scenarios we could think of.<br /><br />ACME Audio, ADA, Ampeg, Black Box Analog Design, Brainworx, Chandler Limited, Dangerous Music, Diezel, elysia (except for phils cascade), ENGL, Maag Audio, Millennia, Noveltech, ProAudioDSP, Purple Audio, Shadow Hills, SPL (except for Hawkeye) and Vertigo | 08/11/2019 | https://www.plugin-alliance.com/en/news/article/items/maintenance-update-02.19.html | Yes |
Positive Grid | There haven't been any reported issues regarding Catalina compatibility with Positive Grid software thus far. <br /><br />To install BIAS FX 2/BIAS AMP 2/BIAS Pedal, please go to System Preferences -> Security & Privacy to allow the installers to run. | 28/01/2020 | https://help.positivegrid.com/hc/en-us/articles/360033806311-MacOS-Catalina-10-15-Compatibility | Yes |
PreSonus | Universal Control 3.1.1 released on October 23, supports Catalina<br /><br />StudioLive Series III firmware 2.1.1 with Catalina support was released with Universal Control 3.1.2 on November 19th. <br /><br />Klanghelm SDRR2Tube now works using version 2.1.0 released Nov 14, 2019.<br /><br />Arturia Analog Lite now works using version 4.1.0.3413 which can be installed from Arturia Software Center. <br /><br />Studio One version 4.5.4 is required to run Studio One under 10.15. <br /><br />Notion 6.5.470 is required to run under 10.15<br /><br />Universal Control 3.1 and older versions are not supported and will not open sample rate settings correctly on macOS X 10.15 Catalina. <br /><br />Universal Control 1.7.6 - for FireWire products still work on Mac OS X 10.8.5—macOS 10.14 Mojave (Windows 7, 8.1, and 10, as well as). However, it will not be available on macOS 10.15 Catalina or future macOS versions. | 30/01/2020 | https://support.presonus.com/hc/en-us/articles/360034790891-Apple-macOS-X-10-15-Compatibility-Statement- | Yes |
Prime Studio | Are yet to make a statement regarding macOS 10.15 Catalina compatibility. As soon as we have any news we will update this entry. | 21/09/2019 | | No Info |
PSP | In their NAMM 2020 email, they announced that "we want to officially confirm that all our plugins are fully compatible with macOS Catalina." | 17/01/2020 | | Yes |
Quiet Art | We have updated WaveRider Tg for Catalina compatibility. You can download it from the support page on our site ( use link) <br />WaveRider v3 will not work on Catalina. We have released v4, which does. This is a paid upgrade from v3.<br />Even though WaveRider is a 64 bit plugin, the MIDI driver which makes the HUI connection possible was a 32 bit driver. Catalina doesn’t support any 32 bit applications.<br />In order to fix this, we had to rewrite the MIDI driver and associated plugin components, hence the paid upgrade. | 28/05/2020 | https://quietart.co.nz/support | Yes |
Reason Labs (formerly Propellerheads) | We are happy to report that the following Reason Studios products are compatible with Apple's macOS Catalina.<br /><br />The following products are fully compatible with macOS Catalina:<br /><br />Reason 10.4.1 and later<br />Reason Intro 10.4.1 and later<br />Reason Lite 11.1 and later<br />Authorizer 2.9.8 and later<br />The following products have not yet been tested with macOS Catalina. Once these products have been tested, we will update this compatibility statement:<br /><br />ReFill Packer 10<br />The following products are NOT compatible with macOS Catalina:<br /><br />Reason 10.4 and earlier<br />Reason Intro 10.4 and earlier<br />Reason Lite 10.4 and earlier<br />ReCycle 2.2.4<br />Reason Essentials 10 and earlier<br />Reason Limited 1.5.3 and earlier<br />Record | 30/01/2020 | https://help.reasonstudios.com/hc/en-us/articles/360009425660-A-note-about-macOS-Catalina-and-Reason-Studios-products | Yes |
reFuse Software | We have not completed any Catalina (10.15) testing yet. We do not recommend upgrading to Catalina at this time. | 24/10/2019 | | No |
Relab Development | Apple is set to release macOS 10.15 Catalina in October. All Relab software is fully compatible with this update. | 28/05/2020 | https://relab.freshdesk.com/support/solutions/articles/25000021124-about-the-mac-os-catalina-10-15-upgrade | Yes |
RME | The latest Mac OS (Catalina 10.15) has arrived, and we’re pleased to announce that as with previous updates to operating systems, this latest edition presents no problem for owners of RME audio interfaces. With RME having a long-standing reputation for producing no-nonsense, rock-solid drivers, it comes as no surprise that Catalina is to be supported from the outset. All RME drivers are written in-house, and therefore not reliant on third–party developers. As such, RME Mac users are able to update immediately and continue working without interruption.<br /><br />Several pro audio and interface manufacturers have issued warnings to customers advising not to upgrade however – for that reason, we’d still recommend (as always!) holding off from upgrading straight away, as it’s highly likely you’ll have other software or tools that aren’t yet supported.<br /><br />Whilst OS Catalina is primarily a technology update (with only a few new user features), users of some legacy software may find themselves caught out – for example, 32-Bit applications will no longer be supported, and iTunes will be replaced primarily by the Apple Music App.<br /><br />RME’s latest driver (v3.18) provides compatibility between OS Catalina and all RME USB audio interfaces, as well as supporting Apple’s “Notarization” requirement. Beta drivers are also available for RME’s non-USB interfaces (PCle, Thunderbolt and FireWire), so other RME users won’t experience any interruption or delay in their projects either. | 18/10/2019 | https://www.synthax.co.uk/latest/2019/10/10/macos-catalina-poses-no-problem-for-rme-audio-interface-users/ | Yes |
Rob Papen | Rob Papen has posted this on their Facebook page... "We are compatible already for many weeks." in reference to compatibility for macOS Catalina | 06/02/2020 | https://www.facebook.com/robpapenfanpage/posts/2936973112998719 | Yes |
Rogue Amoeba | Our current products now all offer support for Apple's newest version of the Mac operating system, macOS 10.15 (Catalina). Be sure to update to the latest versions. | 30/01/2020 | https://rogueamoeba.com/status/ | Yes |
Roland | Roland has a comprehensive page detailing macOS Catalina support fro their entire product range that is too detailed to reproduce here. Please follow the link to check the compatibility of the Roland products that you use. | 30/01/2020 | https://www.roland.com/global/support/support_news/19091015r/ | Yes |
ROLI | We're now pleased to announce that all ROLI products are now compatible with macOS Catalina, v10.15.2. Should you encounter any issues when installing any ROLI software or content, please refer to the list below in case any prompts that appear are a routine part of the installation process of macOS Catalina:<br /><br />ROLI Connect - Please ensure you accept requests to access Documents and Finder during the ROLI Connect installation - this is normal and ensures Connect can install ROLI software successfully<br /><br />Cypher2/Strobe2 (Player or Full) - Click “Install” in ROLI Connect to download and run the Cypher2 or Strobe2 installer, and follow the instructions<br /><br />Equator (+ extended libraries) - Click “Install” in ROLI Connect to download and run the Equator installer. Please ensure you accept requests to access Documents during the Equator installation - this is normal and ensures Equator can access all preset locations successfully<br />ROLI Dashboard - Click “Install” in ROLI Connect to download and run the ROLI Dashboard installer, and follow the instructions. Ensure you click “Always allow” when prompted to enter your system password when you run ROLI Dashboard for the first time<br /><br />ROLI Studio Drums/Player - Install and run RSD/RSP from ROLI Connect - no extra permission requests should occur<br /><br />BLOCKS Code - Download and run the BLOCKS Code installer | 30/01/2020 | https://support.roli.com/support/discussions/topics/36000012404/page/last | Yes |
Scuffham Amps | Apple's next OSX update 10.15 is due for release this Autumn and currently in Beta. S-GEAR v2.71 has been released to address a crash on start-up under OSX10.15. S-GEAR v2.70 is NOT compatible with Catalina. Please take note before installing the Apple public Beta or the final release when it becomes available: S-GEAR v2.7 does not officially support OSX10.15 at this time. | 21/09/2019 | https://www.scuffhamamps.com/forum/3-news-info/8878-s-gear-and-mac-osx-10-15-catalina-updated#20334 | Yes |
Serato | Pitch 'n Time Pro is now supported on macOS Catalina 10.15<br />macOS 10.15 Catalina is supported for use with Serato Studio 1.3.1, Serato DJ Pro 2.3.0, Serato DJ Lite 1.3.0.<br /><br />macOS 10.15 Catalina is not yet supported for use with Serato Pitch 'n Time Pro or LE. We strongly recommend you do NOT upgrade to macOS 10.15 Catalina at this time. We are currently working to ensure that these plugins are compatible with their officially supported DAWs.<br /><br />Please note that Pitch 'n Time Pro & LE operating system support is dictated by the supported DAW that are you using, and its operating system support. | 28/05/2020 | https://serato.com/pitchntime-pro/downloads | Yes |
Signum Audio | Are yet to make a statement regarding macOS 10.15 Catalina compatibility. As soon as we have any news we will update this entry. | 21/09/2019 | | No Info |
Sknote | With regard to macOS Catalina support, Quinto has said "Yes, re-compiling everything! Upcoming NAMM is not helping with being quick but we are running to get 100% compatibility." | 09/01/2020 | | Testing |
Slate Digital | Slate Digital macOS Catalina installers are now available to download! They recommend that everyone updates to the latest version to ensure a seamless experience while using your plugins with macOS Catalina. <br /><br />It is important to note that 32-bit is no longer supported with these latest installers. | 10/02/2020 | https://slatedigital.zendesk.com/hc/en-us/articles/360035155994-macOS-Catalina | Yes |
Softube | Softube have emailed their users with this statement... "We recommend that you wait until Softube software compatibility with Catalina is announced before updating.<br /><br />Our development team is working diligently to ensure that all Softube software is compatible with Catalina. Complete Catalina qualification will be released in a future Softube software update.<br /><br />We will make future announcements about macOS Catalina compatibility on our website.<br /><br />Important: to prevent macOS from updating automatically, uncheck the “Install macOS updates” option in System Preferences > Software Update > Advanced options.<br /><br />Please remain on current versions of macOS until further notice." | 30/01/2020 | | Testing |
Solid State Logic | With the release of OS 10.15 Catalina, Apple have discontinued support for 32 bit applications. This may impact compatibility between your workstation and SSL hardware. Please consult the following list for further information before upgrading your OS.<br /><br />Delta Control Plugins – COMPATIBLE<br />The latest versions of Delta Control plugins are compatible with Mac OS Catalina if you had them ona previous installation of Mac OS. If you are installing a fresh copy then you will need to allow the install within the security preferences. <br /><br />Delta Link – COMPATIBLE <br />Please note that for Pro Tools HD 12.6 or higher, you will require a DigiLink I/O iLok license from www.avid.com, and the latest V2.00 Delta Link firmware.<br /><br />ipMIDI - COMPATIBLE<br />You must be running ipMIDI V1.7 for compatibility with Mac OS Catalina. This is available from the downloads section in the My Products page in your SSL account. Alternatively, you can download it directly from the Nerds.de website here: http://nerds.de/en/download.html.<br /><br />Sigma Remote – COMPATIBLE<br />V2.1/33 of the Sigma Remote application is compatible with Mac OS Catalina.<br /><br />Sigma – COMPATIBLE<br />While Sigma is compatible with Mac OS Catalina, with some hardware configurations it is necessary to connect a network switch between the Sigma and the Mac. SSL Engineers are currently investigating the issue further.<br /><br />SSL Native Plug-ins – COMPATIBLE<br />The V6 release of SSL Native plug-ins is compatible with Mac OS Catalina. Please note that compatibility is subject to DAW version.<br /><br />Nucleus2 Dante interface - COMPATIBLE<br />Check www.audinate.com/resources/faqs for full information on Dante Virtual Soundcard and Dante Controller Compatibility<br /><br />Nucleus2, Matrix2, AWS, Duality - NOT COMPATIBLE<br />SSL Remote software for these products currently uses 32 bit architecture and is unable to run under Catalina. Our engineers are currently working on the issue. Please do not update your OS at this time. | 30/01/2020 | https://solidstatelogic.zendesk.com/hc/en-us/articles/360002465837-SSL-Software-and-Mac-OS-10-15-Catalina | Yes |
Sonalksis | Sonalksis tell us that their AU and VST plugins are compatible with Catalina, but their installer app (the Sonalksis Plugin Manager) is NOT. They hope to release a Catalina compatible version soon. | 30/10/2019 | | Testing |
Sonarworks | Sonarwarks have stated on their website that Reference v4.4 is compatible with macOS Catalina 10.15. | 09/10/2019 | https://www.sonarworks.com/blog/product-news/reference-4-release-notes/ | Yes |
Sonnet Technologies | On their home page Sonnet Technologies state "Now macOS Catalina Compatible - Sonnet eGPU, Thunderbolt and 10GbE products, Pro Media Card Readers, and PCIe Computer Cards"<br /><br />They also have posted a macOS compatibility chart which tells a slightly different story with some older legacy products listed as not compatible. Check the list to be sure. | 22/10/2019 | https://www.sonnettech.com/support/downloads/manuals/macOS_Catalina_Compatibility.pdf | Yes |
Sonnox | Sonnox have posted this statement on their support website... "Apple released macOS 10.15 - "Catalina" - in October 2019. This major update includes more deprecations than previous macOS releases, and you may have already seen other software manufacturer's warning about not updating your operating system for compatibility reasons.<br /><br />Sonnox have been working with Apple to test our plug-ins throughout the beta stages of Catalina, and we're pleased to say that all of our plug-ins are compatible with Catalina." | 10/02/2020 | https://sonnox.freshdesk.com/support/solutions/articles/22000244938-macos-catalina-compatibility | Yes |
Soundflow | SoundFlow 3.4 has been released. Major news includes...<br />Initial Catalina support<br />A new "Intro Tour" (click the Learn menu)<br />Send feedback directly from the SoundFlow Start Menu (the popup window when you click the SF icon)<br />Deep Vienna Ensemble Pro integration. Create and manipulate servers, instances and channels, instantiate plugins etc. Both for scripts and macros. | 24/12/2019 | https://www.facebook.com/groups/soundflow/permalink/549176962590134/ | Yes |
Soundminer | Feb 2020 - Catalina Notice - Both V5 and V5pro are now available from the store and are compatible with 10.15. If you own v4 or v4.5 and need Catalina support, you must upgrade to V5/V5Pro. The HD line is not yet compatible with Catalina. Current version, v308, is good up to and including 10.14. We are working on a new platform version for both Basic and Plus but official release has not yet been determined. Basic is now ready, but PLus is not quite ready. Contact sales@soundminer.com with an ilok user id about options. Features and upgrade pricing are not yet finalized. | 28/05/2020 | https://store.soundminer.com/pages/user-bulletin | Testing |
Sound Radix | Sound Radix has emailed their users with this statement..." We're happy to announce that all Sound Radix plug-ins have been qualified and are now fully compatible with Apple's latest macOS Catalina. To download the latest versions, head on to your User Area.<br /><br />Starting with macOS Catalina, 32-bit apps are no longer compatible with macOS. Therefore, 32 Lives and legacy 32-bit plug-ins cannot work there. If you depend on legacy plug-ins for your work, we recommend installing macOS Catalina on a separate drive or partition.<br /><br />To comply with the latest Apple macOS requirements, new upcoming plug-ins and updates for macOS will be 64-bit only and require OS X 10.8 Mountain Lion or greater. | 18/02/2020 | https://www.soundradix.com/accounts/login/?next=/users/ | Yes |
Sounds In Sync | Apple released its major update for macOS called macOS Catalina (10.15) on October 7, 2019. One of the major changes in this update is that it will only allow 64-bit applications to run. We have been working this year to update our apps for 64-bit, and are excited to announce that all applications have now been updated and are compatible with macOS Catalina. These are the first versions of each app that have been released that are compatible with macOS Catalina: EdiCue v3.1.0, EdiPrompt v2.4.0, EdiLoad v4.0.0, EdiChart v4.0.0, EdiMarker v2.0.0. With Avid releasing Pro Tools 2019.12 and qualified it to run with macOS Catalina (10.15.3) we tested our 64-bit applications on a system with these installed. All functions of our 64-bit applications performed as expected including how they interact with Pro Tools. | 03/12/2020 | https://www.soundsinsync.com/blog/ediapps-and-macos-catalina-compatibility-info | Yes |
Soundtoys | Soundtoys are happy to announce that Soundtoys 5 plug-ins are now fully compatible with macOS Catalina.<br /><br />32-Bit Plug-ins Discontinued<br /><br />In Soundtoys 5.3.2 they have finally discontinued support for 32-bit plug-ins. With macOS Catalina requiring all applications to be 64-bit, and with the vast majority of their PC customers now using 64-bit plug-ins, they decided it was the right time to end 32-bit support. They understand that some users still need time to transition away from 32-bit plug-ins, so you can still visit their site to download the final 32-bit release if you need it. | 19/12/2019 | https://www.soundtoys.com/soundtoys-5-3-2-ready-for-macos-catalina/ | Yes |
Source Elements | The vast majority of our products are compatible with macOS 10.15 Catalina.<br /><br />However, you may experience some issues that could disrupt your regular experience with macOS.<br /><br />We highly recommend not updating to Catalina unless you have verified that all your applications are ready and their developers confirm they are compatible. | 09/10/2019 | https://source-elements.com/support/catalina | Yes |
Spectrasonics | Spectrasonics say "We are currently testing our instruments for compatibility in macOS Catalina. Although we haven’t found compatibility issues with our plugins, the SAGE Converter (a standalone application used to bring your own audio to Stylus RMX) will not work in macOS Catalina. If you need to use the SAGE Converter, we recommend that you do not upgrade at this time. We are working to resolve this incompatibility." | 28/01/2020 | https://www.spectrasonics.net/support/knowledgebase_view_topic.php?id=746&categoryID=84&searchq=catalina&c=71 | No Info |
Spitfire Audio | Spitfire Audio has told us that for their products that run inside Kontakt, it is likely that as soon as Kontakt is compatible with Catalina, so they will be. <br /><br />Spitfire Audio products presented in our own dedicated plugin are not yet compatible with Mac OS Catalina. They will send an email notification when this changes. | 28/05/2020 | https://www.spitfireaudio.com/info/faq/hans-zimmer-strings/ | Testing |
Steinberg | Steinberg say "We’d like to update you on the development and certification process regarding macOS Catalina (10.15) for Steinberg products. macOS Catalina has been released in October 2019, replacing macOS Mojave (10.14). Currently, we are still in the process of final testings for some of our current product releases. This includes the notarization of our apps which is mandatory since macOS Catalina. Part of the notarization is enabling the Hardened Runtime capability which is supposed to add additional security throughout the operating system and will also be mandatory from January 2020 on. Check their website for the latest. Currently, they list the following as macOS Compatible...<br />Cubase Pro 10.5 and 10.0.50<br />Cubase Artist 10.5 and 10.0.50<br />Cubase Elements10.0.40<br />Cubase AI10.0.40<br />Cubase LE10.0.40<br />Cubasis Project Importer2.7.0<br />Nuendo 10.2<br />WaveLab Pro 10.0.0<br />WaveLab Elements/LE 10.0.5<br />WaveLab Pro 9.5.50<br />WaveLab Elements/LE 9.5.50<br /> | 28/01/2020 | https://helpcenter.steinberg.de/hc/en-us/articles/360010273659-macOS-Catalina-product-compatibility | Yes |
Synchro Arts | Synchro Arts is running ongoing compatibility tests with macOS 10.15 Catalina; current tests are run with macOS 10.15.3.<br /><br />For macOS Catalina compatibility you must use Revoice Pro 4.2.0.15 or later - available from the Synchro Arts Downloads page<br /><br />There is a problem with older versions of Revoice Pro on macOS 10.15.1 - the software may crash if you create an APT or Warp process.<br /><br />We will validate our software plug-ins with each supported DAW, once its manufacturer will release a version that will support macOS 10.15 Catalina and later versions.<br /><br />So far we validated the latest versions of our products with:<br /><br />Ableton Live 10.1.7<br />Apple Logic Pro X 10.4.7 and 10.4.8<br />Avid Pro Tools Ultimate 2019.12<br />MOTU Digital Performer 10<br />PreSonus Studio One Professional 4.5.4.54067 and 4.6.1.55987<br />REAPER 6.0.2<br />Steinberg Cubase Pro 10.0.50, 10.5.10 and 10.5.11<br />Steinberg Nuendo 10.2.0 and 10.2.10<br />The latest installers for our products are available from the Synchro Arts Downloads page.<br /><br />More tests are being carried out as more DAWs are being updated for Catalina compatibility.<br /><br />Titan software is not compatible with macOS 10.15 Catalina.<br /><br />Several DAW and plug-in manufacturers still recommend NOT to update to macOS Catalina, on grounds of compatibility.<br />Before you update your system to macOS 10.15 Catalina, we recommend that you check with the manufacturers of your DAW and your other plug-ins of choice, to ensure that this OS upgrade will be fully successful and will not impact your production workflow in any way. Please note that your DAW and plug-ins may require an update to be compatible with Catalina. | 01/03/2020 | https://www.synchroarts.com/faq/synchro-arts-product-support-with-macos-10-15-catalina | Testing |
TAL Software | We have updated all commercial products and notarized the installers for macOS Catalina. Our newer free OSX 64 bit compatible plug-ins will follow. | 30/01/2020 | https://tal-software.com/ | Yes |
Tascam | The following Tascam products are listed as compatible with macOS Catalina...<br /><br />SERIES 102i<br />SERIES 208i<br />MiNiSTUDIO CREATOR<br />MiNiSTUDIO PERSONAL<br />iXR<br />US-1x2<br />US-2x2<br />US-4x4<br />US-16x08<br />Celesonic US-20x20<br />MX-8A<br />DR-05X<br />DR-07X<br />DR-40X<br />Model 24<br />Tascam DCP Connect<br />Tascam MX Connect<br />Tascam EZ Connect<br /><br />The following Tascam products are still under investigation for compatibility for macOS Catalina...<br />UH-7000<br />US-366<br />US-1200<br /><br />Compatibility verification and support for the following products have ended with macOS Catalina:<br />US-100, US-125M, US-122MKII, US-144MKII, US-322, US-1800 | 31/01/2020 | https://tascam.com/us/support/news/6080 | Testing |
TC Electronic | Are yet to make a statement regarding macOS 10.15 Catalina compatibility. As soon as we have any news we will update this entry. | 19/09/2019 | | No Info |
Telestream | macOS 10.15 Catalina is planned to be released in October. Unfortunately, this macOS update introduces breaking changes in relation to ScreenFlow. <br /><br />ScreenFlow 8.2.3 is tested and confirmed compatible to work with macOS 10.15 Catalina. If you get the error that "ScreenFlow can't be opened because it is from an unidentified developer" please click here.<br /><br />ScreenFlow version 7 customers have two options: <br />1. Upgrade to ScreenFlow 8. <br />2. Stay on the Mac OS 10.14, which is the last tested and confirmed OS to work with version 7.<br /><br />ScreenFlow version 6 and older is no longer supported and will continue to work on their respective compatible macOS versions. If you intend to upgrade to 10.15, please consider upgrading to ScreenFlow version 8 for compatibility. | 09/10/2019 | http://telestream.force.com/kb/articles/Knowledge_Article/ScreenFlow-Catalina-Support/?l=en_US&c=Product%3AScreenFlow&fs=Search&pn=1 | Yes |
The Cargo Cult | The current installers work and the plugins are running as expected in our tests. <br /><br />Conformalizer is not supported due to its use of the 32bit QuickTime framework. A replacement is on its way but there’s nothing we can say yet about a release schedule. | 01/02/2020 | | Testing |
Todd-AO | Are yet to make a statement regarding macOS 10.15 Catalina compatibility. As soon as we have any news we will update this entry. | 21/09/2019 | | No Info |
Tonsturm | Tonsturm have announced that TRAVELER V.1.1.1 is now fully compatible with macOS Catalina. Newest download link is always available from the TRAVELER product page. | 10/02/2020 | https://tonsturm.com/software/traveler/#buy | Yes |
Tovusound | You are ready to go with Kontakt 6. Kontakt 5 is not supported and we doubt it ever will be. Therefore ProTools 10 users on Mac stay away from Catalina! | 31/01/2020 | https://tovusound.com/info-about-macos-catalina/ | Yes |
Townsend Labs | Townsend Labs have given us this exclusive statement... "Townsend Labs software is not yet supported on macOS Catalina. We are currently testing a beta version of the Sphere plug-in which supports Catalina. If you want to try the beta version please contact us." | 09/10/2019 | | Testing |
Tracktion | Are yet to make a statement regarding macOS 10.15 Catalina compatibility. As soon as we have any news we will update this entry. | 19/09/2019 | | No Info |
u-he | On January 28th 2020, u-he have emailed their users with the following announcement. "As the deadline for notarizing software for macOS 10.15 Catalina comes close, we're releasing updates for all of our plug-ins, either as new versions (ACE, Diva, Hive, Repro, Zebra2/ZebraHZ) or as notarized re-releases (everything else). " | 28/01/2020 | https://u-he.com/news/ | Yes |
UJAM | With the arrival of macOS 10.15 Catalina on October 7. 2019, we worked directly on the compatibility of all of our products. Now everything is fully compatible and there shouldn't be any problems. | 29/01/2020 | https://support.ujam.com/hc/en-us/articles/360009917619 | Yes |
Universal Audio | The latest UAD software is tested and compatible with macOS Catalina. With Catalina, macOS system security requires the seven manual steps below to fully enable UAD and Apollo software. | 28/05/2020 | https://help.uaudio.com/hc/en-us/articles/360033607311-macOS-10-15-Catalina-Compatibility-Info | Yes |
UVI | UVI has let us know that they are now 100% Catalina compatible. | 14/02/2020 | https://www.facebook.com/UVI.Official/photos/a.10150477316680941/10157797618845941/?type=3&theater | Yes |
Valhalla DSP | We have released updated installers for all Valhalla plugins (full and demo), that are signed and notarized for macOS Catalina. | 31/01/2020 | https://valhalladsp.com/faq/compatibility/are-your-plugins-compatible-with-macos-10-15-catalina/ | Yes |
Vienna Symphonic Library | With the latest releases for all our software products we are now ready for macOS Catalina, along with some great improvements and bugfixes. <br /><br />Please make sure that you have tested all components of your setup / environment before commiting to any new OS. | 31/10/2019 | https://valhalladsp.com/faq/compatibility/are-your-plugins-compatible-with-macos-10-15-catalina/ | Yes |
Virtual Katy | Are yet to make a statement regarding macOS 10.15 Catalina compatibility. As soon as we have any news we will update this entry. | 21/09/2019 | | No Info |
Wacom | The 6.3.36-2 driver added Mac OS 10.15 beta compatibility. The driver is located here: https://www.wacom.com/support/product-support/drivers | 19/09/2019 | https://www.wacom.com/en-us/support?guideTitle=Is-there-a-driver-for-Mac-OS-10.15-Catalina-Beta%3F&guideId=015-916 | Yes |
Wave Alchemy | Are yet to make a statement regarding macOS 10.15 Catalina compatibility. As soon as we have any news we will update this entry. | 21/09/2019 | | No Info |
Wave Arts | With some recently released hosts, our older plug-ins do not draw, the plug-in GUIs appear black. See this FAQ entry for more information.<br /><br />If you are using older plug-ins (Power Suite 5, Master Restoration Suite, Dialog), make sure to install the latest versions, otherwise you will likely get “installation error” messages when opening the plugs. The latest versions are 5.90 for Power Suite 5 and Master Restoration Suite, and 1.39 for Dialog. | 28/05/2020 | https://wavearts.com/support/faq/category/wave-arts-general/macos-10.15-catalina-support | Yes |
Waves | Waves are pleased to announce a new version of Waves plugins, Waves V11. Update to V11 to future-proof your sessions, ensure compatibility with the latest DAWs and operating systems (including MacOS 10.15 Catalina).<br /><br />Note that Nx and Abbey Road Studio 3: Head tracking with the camera is not working on macOS 10.15 Catalina. | 28/10/2019 | https://www.waves.com/introducing-waves-v11 | Yes |
Wavesfactory | The Trackspacer mixing tool was updated to version 2.5.5.<br /><br />macOS Catalina compatible.<br />Auto updater included.<br />More detailed display.<br />Retina images.<br />Resizable window.<br />Bug fixes.<br /><br />Version 1.5.1 of the Spectre spectral enhancer also comes with macOS Catalina compatibility and the Auto updater, enhanced workflow, resizable window, and some bug fixes.<br /><br />The Cassette tape emulation effect was updated version 1.0.3 to fix compatibility issues with older macOS versions.<br /><br />The updates are free to existing users. Note that 32-bit is no longer supported so don’t update if you still work in 32-bit hosts. | 28/05/2020 | https://rekkerd.org/wavesfactory-updates-trackspacer-spectre-cassette-plugins/ | Yes |
Zoom | As of December 25th 2019, our product compatibility with macOS Catalina (v10.15) is as follows.<br /><br />MultiTrack Field Recorders<br />F8n: Yes<br />F8: Yes<br />F6: Yes<br />F4: Yes<br />F1: Yes<br /><br />Handy Recorders<br />H6: Yes<br />H5: Yes<br />H4n Pro: Yes<br />H3-VR: Yes<br />H2n: Yes<br />H1n: Yes<br /><br />Handy Video Recorders<br />Q8: Yes<br />Q4n: Yes<br />Q2n-4K: Yes<br />Q2n: Yes<br /><br />Audio Interfaces<br />GCE-3: Yes<br />TAC-8: Yes<br />TAC-2R: Yes<br />TAC-2: Yes<br />UAC-8: Yes<br />UAC-2: Yes<br />U-44: Yes<br />U-24: Yes<br />U-22: Yes<br /><br />Digital Live Mixers<br />L-20R: Yes<br />L-20: Yes<br />L-12: Yes<br />L-8: Yes<br /><br />Multi-Track Recorders<br />R24: Yes <br />R16: Yes <br />R8: Yes<br /><br />Guitar Effects Pedals<br />G5n: Yes<br />G3n/G3Xn: Yes<br />G1 FOUR/G1X FOUR:Yes<br />G1on/G1Xon: No<br /><br />Acoustic Effects Pedals<br />AC-3: Yes<br />AC-2: Yes<br />A1 FOUR/A1X FOUR: Yes<br /><br />Bass Effects Pedals<br />B3n: Yes<br />B1 FOUR/B1X FOUR:Yes<br />B1on/B1Xon: No<br /><br />Vocal Effects Pedal<br />V6: Yes<br /><br />MultiStomp Pedals<br />MS-50G: Yes<br />MS-60B: Yes<br />MS-70CDR: Yes<br /><br />Software<br />TAC-8 MixEfx: Yes<br />TAC-2 MixEfx: Yes<br />UAC-8 MixEfx: Yes<br />UAC-2 MixEfx: Yes<br />HandyShare: Yes<br />MS Decoder(64bit): Yes (Updated)<br />Guitar Lab: Yes<br />ZOOM Ambisonics Player: Yes<br />MS-50G EffectManager: Yes<br />ARQ Editor: Yes | 26/12/2019 | https://www.zoom-na.com/news/macos-catalina | Yes |
zplane | zplane tell us that their plugins do work after upgrading to macOS Catalina. All zplane Mac installers are now macOS Catalina compatible, to be sure you have the right installer here is the list for each zplane product; elastiqueAAX 2.2.0, Elastique Pitch 2.1.1, ppmBatch 1.1.0, PPMulator 3.5.0, reTune 1.2.2 and vielklang 2.4.3 | 28/10/2019 | | Yes |
Zynaptiq | Although there hasn't been an explicit announcement from Zynaptiq regarding macOS Catalina, in our research we noticed that on the Download page for each product there is the option to select macOS Catalina as the OS you are running. | 28/05/2020 | | Yes |